TC-R2A
Drill, tap and mill non-stop with our TC-R2A.
Working as a pallet changer, the "quick table" allows for simultaneous workpiece loading/set up and operation. Our TC-R2A's two-face quick table easily accommodates a housing for a notebook-sized personal computer, and turns 180 degrees in 2.8 seconds.
The NC unit employs the NC language programming format, in addition to BROTHER's original conversation type programming format. The selector switch enables switching between these formats. Double indexing is possible using an additional two axes control.
TC-R2A Specifications
| X Axis Travel | 16.5" |
| Y Axis Travel | 12.6" |
| Z Axis Travel | 10.6" |
| Spindle RPM | 10,000 (opt. 16,000) |
| Tapping RPM | 6.000 |
| Spindle Horsepower | 9,78 |
| Rapid Traverse | 1,181 IPM (x-y) 1,969 IPM (z) |
| Cutting Feedrate | 787 IPM |
| Pallet Size | 19.7" x 11.8" |
| Pallet Change Time | 2.8 sec |
| Maximum Loading Capacity | 176 Lbs (per pallet) |
| ATC Capacity | 14 |
| T-T TIME | 1.1 sec |
| Chip to Chip time | 1.8 sec |
| Tool Shank Type | MAS-BT30 |
| Maximum Tool Length | 7.9" |
| Maximum Tool Diameter | 4.92" |
| Maximum Tool Weight | 7.7 Lbs |
